Pure TPU210 hot-melt adhesive powder — the layer that actually bonds your printed design to fabric. Fast-curing, minimal oil return, and easy to shake off when over-applied, this white powder is formulated for consistent results across HueDrift printers and most standard DTF setups.
Built for Speed and Clean Handling
This powder is formulated to cure quickly without oil return — the greasy residue that shows up when ink hasn't fully dried before curing on lower-quality powders. Excess powder shakes off cleanly rather than clumping, so less product is wasted per print, and the cured film separates easily from the garment during peeling, which keeps your production moving without extra handling time.
Fast Cure, No Oil Return
Cures cleanly without the greasy residue that slows down lower-quality powders.
Wide Material Compatibility
Works across cotton, canvas, polyester, and most standard DTF-compatible fabrics.
Wash-Fast Durability
Holds color and adhesion through repeated washing without cracking or peeling.
Technical Details
| Specification | Detail |
|---|---|
| Composition | Polyurethane (TPU210) |
| Appearance | White powder |
| Particle size range | 100–220 μm |
| Pressing temperature | 145–160°C (293–320°F) |
| Pressing time | 8–12 seconds |
| Compatible printers | HueDrift One, HueDrift Pro, HueDrift Pro Max, and most standard DTF printer models |
Wash Fastness Rating
Rated on a standard 1–5 grey scale (5 = no visible change, 1 = significant fading or damage) — a common textile industry benchmark for judging how well a print holds up under repeated washing and dry cleaning.
| Test Condition | Rating |
|---|---|
| 40°C water wash | 4 / 5 |
| 60°C water wash | 3 / 5 |
| Dry cleaning | 4 / 5 |
Why the 60°C rating is lower: Hot water washes are harder on any hot-melt adhesive bond, DTF included. For maximum print longevity, we recommend washing finished garments in cold or warm water rather than hot, regardless of which powder brand is used.
How Much Powder Do You Need?
Actual coverage depends on design size and density, but here's a rough starting point for planning your order:
Common Questions
Yes. This powder is compatible with all HueDrift DTF printers — One, Pro, and Pro Max — as well as most standard DTF printer models on the market.
Keep it sealed in a cool, dry place away from direct sunlight. Moisture exposure can cause clumping and affect how evenly the powder melts during curing.
We recently updated our powder packaging. Orders may ship in either the old or new packaging at random — the powder formulation inside is unchanged.
Contact us with photos of any damage or moisture-related issues on arrival, and we'll arrange a replacement or compensation.
Reviews
There are no reviews yet